HP LaserJet 3055 All-In-One Printer "scanner bulb formatter" Questions

...scanner bulb warming up, but light never comes on. Sometimes it gives a 79 error Hi The option you have is to check and make sure the connection between the formatter and scanner formatter are ...

My HP 2840 is displaying "Scanner Error 3" turn off then turn on Insufficient light given off from the scanner bulb. Could be the bulb or the formatter.

bulb. but still the problem persists. Scanner errors are as follows for that model: Scanner error # 1 = dark find 2 = LMW temp find 3 = bulb warm up from off 4 = bulb warm up from coarse 5 = cal label

Scanner Bulb From Warming Up? The printer is fine until I scan a document. Then I get a message that the scanner bulb is warming up and the scan bar keeps going back and forth. I cannot stop it and no

...scanner bulb should glow for a while, during the booting process. The Flexible Flat Cable (pitch 1 mm x 30 Pin) should not be damaged (replace if damaged) and well pushed inside its jack in the ...

Scanner bulb is lighting. If not check the cable from the scanner to the formatter and seated correctly. The scanner or the formatter board may be bad. If I could be of further assistance, let me know

Scanner bulb warming up might appear on the control-panel display, and the scan head moves back and forth for 10 to 15 seconds. If you lift the scanner cover, you will see that the scanner bulb is lit

scanner bulb warming up than the issue is with Scanning Assembly inside the printer and it is hardware issue. HP 3055?s have a known problem with the formatter board and if your printer is in warranty

...the scan unit, do a copy and check if the scanner unit moves and check if the bulb is burning. These machines are notorius for dodgy formatter boards. But i would start with checking the scanner

Hp 6700 Scanner bulb flashes return it; if the machine doesn't come to ready, then the scanner assembly is defective or the formatter board is defective. in eaither case, I'd return it.