HP LaserJet 3055 All-In-One Printer "getting line down paper scan" Questions

...getting a black line down the right side of the paper - there is no black line when I print from the flat bed with the glass - only get black line when printing from top feeder I have cleaned every ...

...line going down the left side of the page. How do I get rid of the line? Lines on scanned and copied documents is usually caused by something on the scanner glass such as ink, correction fluid or ...

...getting 2 lines running down one side of my copies, only when I put them through the document feeder. When I lay paper right on the copier, the copies are perfect. As the page you wish to copy goes ...

...line on copy/ scan; but not on print from computer Hello, The problem you are having is either ink, correction fluid or something has stuck on the scanner pickup image sensor. To clear the material ...

...getting the line when using the auto feeder (without lifting top) pay close attention to the strip of glass. When a document is auto-fed it moves the original past the strip of glass. A dot (pen mark ...

...line down the right hand side of the page. I suspect there is dirt on something, but have no access to the inside of the machine. Yesterday there were a few copies that had a very muted line, but ...

...down 1 side If your printer has both an automatic document feeder and a flat glass portion for scanning, try scanning from both. If you only get the lines on one of the scans then that is where your ...

...line down the paper on copy mode. Ok in print mode. There is a BOLD Black line down the paper on copy mode. Ok in print mode. Prints fine. Have replaced the drum and still get the black line. What's ...

...line. Any suggestions? Yes, this machine has what the call a scanning glass.Its the small thin glass where the paper goes down through the doc feed.its on this glass. A real close visual or take a ...

...getting this double line down the paper when I scan. No problem with printer, just scanning feature. HELP ! Thank you! Cops is correct if you lift up ANY all in one machines, you will notice that ...