...TX / RX Document is too long, or page time-over #005 TX / RX Initial identification (T0 / T1) time-over #009 RX Recording paper jam, or no recording paper #012 TX No recording paper at the receiving ...
Question about HP LaserJet Office Equipment & Supplies
...TX / RX Document is too long, or page time-over #005 TX / RX Initial identification (T0 / T1) time-over #009 RX Recording paper jam, or no recording paper #012 TX No recording paper at the receiving ...
TX/RX log? NG just means the fax was unsuccessful or No Good. After the NG should be another number code that tells what type of error it was. Could be busy on the other end, poor line quality, or any
...Rx means receive, Tx means transmit. The fax settings are under additional functios * on keyboard. Or you can put a switch in the phone line. When you tell it manual you will have to be there to ...
Question about HP LaserJet Office Equipment & Supplies
...if your machine is on a network then all is as it should be. They are called link and rx/tx. They just indicate you're connected to another network device and the other flashes when data is
...Tx" or "Snd", you tried to send a fax, and the other fax machine did not answer, then it was either turned off, or out of paper or ink. If the mode was "Rx" or "Rcv", it means your fax machine tried ...
TX, RX and Activity) remain in memory. The default setting is [ON], which means incoming received faxes and transaction reports will automatically print. The fax machine will not automatically print a
Question about HP LaserJet Office Equipment & Supplies
...document in the memory reference submenu. Then enter the TX/RX No listed on the memory list. if that doesnt help.... contact canon at the earliest..... thank you for using fixya... have a nice ...
...tx/rx (send and receive) number off of that sheet. 5. Go back to the menu and print a document from the menu. 6. It should ask what number document in the memory to print. 7. Put in the tx/rx number ...
TX Result Report or an RX Result Report when an error occurs. See the table below for individual error codes. Error Code Description Action 0001 The sender may not be using a G3 fax machine. Make sure
957 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
663 Questions
593 Questions
492 Questions
