use my HP6210 officejet scanner to scan 35 mm slides You cannot scan slides with this scanner. Slide scanners need a light source that shines through the slide not a reflecting light like your scanner
Question about HP OfficeJet Office Equipment & Supplies
...that has a second light source in the lid of a flat bed scanner. This light shines a light through the negative and the main light source under the glass is not switched on for negative
Question about HP OfficeJet Office Equipment & Supplies
...scanner light is on. once the scanner light is not working then try to return your printer in the store that you have purchased it. Try re-installing the scanning software. I have a j4540 all in one ...
...scanner light Follow these steps to check the scanner light by making a color copy of any document. Load plain white, unused, letter size paper in the paper tray. Lift the scanner lid, place the ...
...scanner hasa flat tab that fits into a slot that has a very small light in it.That tells the bar to stop. When dust collects in the slot area, thelight can't see the tab, and the bar bangs into the ...
...scanner light continuously pulls the scanner light assembly towards it even when it can not go any further. Motor pulls continuously in same pattern also of start, stop, start, stop, ...eventually it ...
was installed what is the error message. if it says "scanner error" try to scan and check the scanner glass if there is a light if there is no light then the scanning mechanism is not working properly
...scanner unit is not putting out enough light, the machine monitors the light out put and if insufficient it gives a scanner error. I'm sorry to say the the cost of a scanner unit normal puts the ...
...scanner powers up - ie light comes on when first powered. If nothing - check your power supply and replace or repair if necessary. Test data cables by changing cable or changing data port. If the ...
Question about HP OfficeJet Office Equipment & Supplies
scanner light come on scanner seem to be stuck ,have tried uninstalling and reinstalling software still the same problem Hi Bbear, The problem here is with the scanner bulb, the scanner bulb is bad. I
3,272 questions posted
Usually answered in minutes!
1,584 Questions
1,223 Questions
991 Questions
857 Questions
782 Questions
