HP Photosmart 2575 All-In-One InkJet Printer "not turn" Questions

not turn on Had a paper jam and now it will not turn on. Checked all power and turn off everything but still will not turn on Rusty i had turn off the main switch without putting off the printer first

not have Cancel] buttons down at the same time and turn the printer off with the power button. 3) Keep holding the buttons down until the printer turns off. 4) While pressing the and buttons, turn the

...not turn off by unpluging or turning off the surgeprotector or you may damage the printer" any suggestions ? The printer should have its own ON/OFF switch (or button). Always use that control to ...

...not turn on, connect the product to an electrical outlet in another room, and then quickly press and release the Power button ( ) to turn on the product. If the product turns on , the electrical ...

...not turn on the little light on front is on ther is pwer to the printer Hi there ! Check the power supply if your accidentally plug your printer to 110 volts and surely it will not print and as you ...

not work. Power Drain: Turn OFF the printer, disconnect the power cable from backside of the printer and from wall outlet. Press and hold the Power button for 60 seconds. Connect the cable and turn ON

...not turn on,I think it's in the power adapter Our printer(all in one) will not turn on, I've uninstalled it andreinstalled it and still there's nothing We bought two of these in March of 2007, this ...

...printer on before you turn the computer on. Some computers do not recognise the peripherals turned on afterwards. with the result of a frozen screen. Hope this will work for you. Good luck ...

...not complete, for that: 1.Turn off the printer and turn it on again 2.Let the printer print the allignment page 3.After printing the alignment page, disconnect the USB cable which is connected behind ...

...Turn on the printer again. It resets the printer into factory settings. After you have turned on the printer, do not do anything on it. Wait for the printer to reinitialize and it will prompt the ...