Question about HP ScanJet Office Equipment & Supplies
...lever on the bottom of the scanner to lock the mechanism during shipping or transport. Make sure that lever is fully in the unlocked position! HP designed a quick and easy tool that diagnoses and ...
...appreciate your help in this regard. Thanks Hi, it is possible that your scanner has a transport locking lever or knob underneath which might have been keeping the carriage locked in place. Try ...
Question about HP ScanJet Office Equipment & Supplies
...Lock the scanning mechanism using the green locking lever underneath the scanner by sliding it inward toward the center of the scanner until it clicks in place. 3. Gently raise the scanner cover and ...
Question about Office Equipment & Supplies
...have UNLOCKED the scanner hardware Some scanners have a locking lever, some have screws that lock . Look on the bottom of the scanner to see if there is an arrow pointing to the lock screw or a
Question about HP ScanJet Office Equipment & Supplies
...Lock on. There is a lever to turn when you unpack your scanner. This is used to lock the hardware in place while the device is being shipped so nothing shakes loose. It needs to be unlocked when you ...
...Lock Lever is broken and need to be replaced. you are recommended to contact a Fujitsu scanner expert for the replacement. Please let me know your location, so that I can refer you a Fujitsu scanner ...
...lever that would manually lock the scan head in place, done especially if you are transporting the device. This lever are sometimes awkward or hard to move/unlock. It is not like a button or switch ...
Question about Epson Office Equipment & Supplies
...a lever that shows a lock and a unlock by where you plug in the wire to the computer. It must be in the unlocked position otherwise it will make that loud clicking noise and not work. Hope this
Question about Konica Minolta Office Equipment & Supplies
hi i just bought a second hand konica minolta c350 and when i print something it is notting enough clarity. please anybody can help me . And also i have changed the whole toner unit and still no ...
...the ribbon cable,I undid the 4 self-tappers affixing the front switch plate,also maybe as well to lock the mechanism before you start: turn the little orange screw underneath with a 20p piece or a ...
49 questions posted
Usually answered in minutes!
244 Questions
109 Questions
80 Questions
73 Questions
80 Questions