...screen. If not connected to computer it will go to sleep within a few seconds with the green light turning amber. Can anyone help us with this problem? Thanks, Mark & Tina From your description your ...
screen is blank If I turn the power off then turn it back on the screen will come up for only a second then go blank again. the monitor had been working fine before. I have changed the video and power
Question about Dell UltraSharp Computers & Internet
...screen power ??? help!! I was given a 1900fp (silver bezel) with no cords and wasn't told it's working state. Connected a new 14v transformer to the monitor and a known working vga cable. The 2 left ...
Question about Dell UltraSharp Computers & Internet
...screen visible for about 3 seconds then goes blank. There are two versions of the power supply/inverter PCB assembly, you need to look inside to see if it has any bad caps with bulging tops first, ...
Question about Dell UltraSharp Computers & Internet
screen has completely gone blank. I can see it is receiving power as the switch button is still glowing and i connected another monitor to my pc to find it prefectly working. So there's a problem with
...Power in on, all connections are good, but no image...just a blank screen. Unplug the monitor from the computer, it should display the diagnostic screen on monitor in color. if not reconnect it and ...
...screen after it goes black if you can see the words through the glass ... That means the back light is bad...or the power supply feeding it. it will be cheaper to buy a new one. if thats the
...Power on both CPU and monitor. After it went blank, you have to check that you can see the image on the screen by shining a flashlight into the screen, not directly but find the best angle to the ...
screen at random times will turn blank, can be a full colour or multi coloured vertical stripes. Have to kill power to laptop then reboot. Any ideas would be welcome Check the cable to the back of the
...screen. The green light for the power button is on and so is the green light for the analog botton (1). I tried all the troubleshooting tips that Dell User Guide suggested without success. Does this ...
20 questions posted
Usually answered in minutes!
101 Questions
94 Questions
96 Questions
77 Questions
74 Questions