...not sure how to put it back on. the machine fills up with water but it wont agitate rotate pulleys while trying to reinstall belt. if belt slipped off on its own then belt is streched out. replace ...
...wont spin About 90+% of the time when a dryer won't spin it is a broken/slipped belt. If the dryer makes some niose when activated, then the motor is turning, which exonerates the motor, leaving ...
...pulls are turn free water drains but wont spin right. This is joyce sounds like the belt needs to be tighter. sounds like its slipping on pully. that may be why its not spinning correctly. thanks ...
belt slips the burning smell happens because the pulleys are spinning and the belt isn't. You will probably need to adjust the tension on the pulleys or get a new belt. This can happen from constantly
Question about Washing Machines
...wont. spin clothes properly it drains the water but clothes are still dripping wet and there no blockage your belt may have come loose. and needs replacing. this will cause it to slip and not spin ...
...wont spin Washer will not pump water out. It makes a gurgling noise like the belt is slipping or something or grinding. What could be the problem. I think the belt is slipping on the pulley. But ...
...belt is slipping and gets hot and wont work, then cools and will spin for a while but slip again. Try to open the back of your machine and take alook at the belt (see if it is alligned or too ...
...wont go around or spin its not the belt as its still on Try turning the drum by hand to see if it is not the bearings that have siezed, If the drum turns see if the belt is not too slack and is ...
Question about Hotpoint Washing Machines
...otherwise wont turn It worked fine until belt snapped now its only turning with 3 items perhaps the belt is slipping and needs adjusting on the tension-er so that the pulleys can the belt more ...
Question about Maytag Washing Machines
...belt slips on the motor pulley and this causes erratic readings from the tacho that is interpreted by the control unit as an fault. A test for this is to run an empty cycle to reduce the load on the ...
46 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
947 Questions
680 Questions
658 Questions