Maytag Performa PAV2200 "unbalanced load reset washer" Questions

...unbalanced load,you can try unplugging it or kill power to the washer forlike 10 minutes to reset the computer board and hopefully this will do the trick,i've never seen this code,i goggled it and ...

...unbalanced load and then I put another load into the washer. The washer does not spin or rinse it just keeps running. How can I reset the washer. I tried unplugging the washer but it still just kept ...

...unbalanced load. push the pause cancel button twice, that should unlock the washer. open the washer, and look inside. Is there a lot of suds, or towels that are tangled up? If so, add some fabric ...

load became unbalanced and the drum struck the interior floor of the washer where a switch is located. This swich is designed to stop an unbalanced spin cycle from damaging the machine. To reset this,

...unbalanced. The reset feature still works fine, so the washer is still usable. What might be causing this? There is a small spiral spring between the bowl and the cabinet, which help hold the bowl ...

unbalanced load in the spin cycle and stopped. I got the clothes out and am line dying them. Now I cannot start another load-once it locks all the machine does it make a clicking noise. Is there a way

...load unbalanced. The washer stopped and the clothes are soaked waiting to spin. I balance the load but still wont drain. Then when I reset it like 8 times, it would work. But keeps doing this. Take ...

unbalanced load cause this? Is this a lid switch problem? Is the control dial bad? Please Help. Thanks in advance. a small run of these actually had an out of balance switch and fuse assembly that cut

110.27087604 ul code this means uL-Unbalanced Load please fix it . balance the load and reset. see the instr. manual section troubleshooting.or download from www. retrevo.comGod bless you

...unbalanced load error. This could be an easy fix. Make sure that the washer is level. Next, check the load in the washer and redistribute the items. If the door is locked, you may need to force the ...