Maytag Performa PAV2200 "turning control sounds washer" Questions

...sounds like the controller/timer is bad. If this is an old dial timer type control, can you turn the control and cause the washer to drain? If so, replace the timer control. If it's an electronic ...

...control installation. Sounds like the pump is locked up for some reason could be something stuck in it,I have pulled a lot of nickels out those for some reason, they are the perfect size to get down ...

...turning self on ready for wash. Does it randomly during day are there ghosts in the house jus kidding u r probably having an issue with the control board it sounds like it has shorted and needs ...

Error code ESE I have a Frigidaire Affinity washer .It will start to fill up and then stop... will not spin or fill any more... I hear a buzzing sound when turned on. I get the error code ESE This is ...

control board. On the Samsung top-loader, it means a "child lock error" has happened. On that washer, you will see "CL" or "DE", the washer will auto-drain and an alarm will sound. To clear the error,

...power supply, wait for 10 minutes, then plugged in the power cord. Machine turned on, initalized than turned off by itself. depending on model, it sounds like a control module fault. Regards ...

...turning it on, but only the washer works Reset the unit at the circuit breaker of  your home first. If nothing changes contact a professional. Sounds like the control board and power supply are ...

...sounds like the motor controller is faulty.if u have power to unit and the lights aren't on then it is either faulty controller, or faulty pump or best case broken power wire.please turn power off b4 ...

...sounds like you have a Control Lock issue. The following link explains how to correct a Control Lock problem on a Whirpool Duet: http://www.fixya.com/support/r2469429-kenmore_elite_amp_whirlpool_duet ...

...turning it on, It starts to fill with water for a couple of seconds, Makes humming sound, Tub does not move. Does this for a couple of minutes then beeps and gives the E53 error code. Could it be the ...