Question about GE Dishwashers
...when the ground wire touched the metal inside of the dishwasher? I recently had a new dishwasher installed while I was at work. My wife was there to observe. After the tech finished installing it, ...
I am installing a used Equator SB924 dishwasher and the wiring connection has a ground , blue and brown wires. Which is the hot & nuetral? Run a continuity check from one of the wires to the frame
...install the power cord. The color code for installation is as follows: Black - HOT lead (120 VAC) White - Neutral (0 VAC) Green (or Bare Copper) - Ground Match the wires to the corresponding colors ...
...and the ground wire to the ground screw inside the electrical box. All this information is in your installation manual. Read
...install a 4-prong power cord on your dryer: http://www.fixya.com/support/r793520-3_prong_4_prong_power_cord_conversion The primary difference between the two configurations is how the Neutral and ...
...install kit for the Kenmore 1344 dishwasher, isnt color coded. The power cord is 3 leads of course but the manual says nothing about which lead to connect to the color coded wires coming from the DW. ...
...the accomodate pulling the dishwasher out from under the counter, if required. The power cord is installed in a junction box behind the lower toe panel that's located directly below the door. The ...
Question about Dishwashers
...from the metal sink. THe only electrical item in the vicinity is the dishwasher. This has been installed for about 9 months without this problem. I unplugged the diswasher and this problem seems ...
...wire to a terminal box, or purchase and install a power cord. You can purchase a three-prong power cord from any major hardware store. Power tool replacement cords work best, because they handle ...
213 questions posted
Usually answered in minutes!
800 Questions
243 Questions
226 Questions
184 Questions
155 Questions