...clean. I don't see holes on top of blade. Did you use the orange handled tool to loosen the blade? Once you do this, each piece comes off easily for cleaning. The first piece is the blade, then the ...
...clean blade and screen How do i clean my blade and strainer First thing you need to do is take it apart, which can be done pretty simply until you get to the actual blade and strainer. You will need ...
clean? I did some research here on Fixya and this is what another expert had to say.........pull the metal bar forward and down to open up into the blade compartment. your juicer should have come with
clean did not get any instructions Take off the top part of the juicer that has the chute. You will see the blade and basket. The blade appears to be attached to the basket with three small screws but
I need to know how to take this puppy apart for cleaning... The parts on the periphery snap on and off without any problem; however, the center (Stainless Steel cutting blades) will not disengage. Can
How do I remove the mesh blade to clean? how do i clean the blade $ unit also
cleaning instructions I did not get cleaning instructions with my machine and I just used it for the first time. Can you tell me how to get the blade and spout part unattached? Try this. It works for ...
...inside of the blade unit, at the bottom of the "bowl." That's where you remove the blade unit for cleaning and reattach and tighten
...clean the blade and filter and the other is a tool to remove the blade from the base. The tool to remove the blade is a small half-moon shaped handle w/ two pegs that fit into the two holes in the ...
...I'd either get the darned blade out or break it for good. It took some prying but the blade popped out and it was the RIGHT way to handle it after all. Now everything is clean and ready to use
44 questions posted
Usually answered in minutes!
2 Questions
1 Questions
