Panasonic PT-40LC12 40 in. LCD Television "trouble shooting flashing light" Questions

...trouble shoot backlight issue Sharp LC46D62U Was flashing single green light -( light error ) .If forced on I have sound but no picture seem to be a back light issue. either no voltage reaching it, ...

...reapeats again with six times red flashing Sounds like a power supply issue. order a new power supply or trouble-shoot the current. Look for any capacitors that are bulged up on the top and not

...flashing light but after a few tries to turn it on the timer light started the 2 blink code again help! First you will have to trouble shoot to determine if it's the power supply or the inverter ...

...manual for trouble shooting, once you replace the power supply if something else dosent work then you will have flashing lights that will pin point the board affected. hope this helps. happy ...

When I attempt to power on the TV, the power light flashes green twice and then returns to red without the TV coming on. check the trouble shooting guide in the manual that came with the TV.

Wayne,Damage limitation. The manual for the television should have a trouble shooting guide, normally to the rear of the manual/users guide. Check it out before you go spending any cash.Good Luck,Jack

...light flashes 8 times and then pauses and the flashes 8 times again, continuously repeating this pattern. Can this be fixed? HelloThe set can be set right by repair.  You must have through ...

...trouble shooting then if you don't have an idea or experience you need qualified technician. anyway i can give you some guide so if you want to fix with your own . what you need is digital tester ...

trouble shooting guide for the techs, you have lost something either in the power supply or another board in your unit. Depending on the sequence of the flashes tells us what to look for. Is this a TV

trouble shooting consists of testing things first and then deciding which board has to be purchased and tried.You might be better served to have a shop look at the unit and get an estimate for repairs