Panasonic PT-40LC12 40 in. LCD Television "thermal fuse power supply" Questions

...thermal fuse in power supply LSEP1279 It could be located next to the power inlet (phase+neutral).  It might look like a large ceramic capacitor, but is a thermal fuse.  You can see a ...

...doesn't turn on Mitsubishi mb46809 doesn't turn on Check power supply and any switches needed to power the tv on. Some sensors fail (EX: thermal fuse) and this will cause a power failure. Thank ...

...A MINUTE THEN KEEPS FLASHING RED .WHATS WRONG? # of red flashes = error code. 3x = lamp door or lamp not fully inserted 4x = fan error 5x = lamp driver error 6x = power supply or thermal fuse ...

...thermal type fuse. If not a fuse issue, look for a short in the power supply or wherever that fuse is located. This is most likely a power inverter board failure. The small transformers i believe ...

...supply input is standard nowadays. Assuming your asking what would be damage, this could be anything from the fuse, thermal resistor, rectifier diodes, and the regulator IC of the power supply

...thermal or special slow blow types---put a generic fuse of proper rating in and it can pop instantly for no reason.Other than that it has to be between the input for the power cord and the output of ...

thermal sensor going bad. It's a round wafer capacitor on the printed circuit board. YOu will have to order the part from an authorized parts place because they usually have no values printed on them.

...thermal fuse. You can purchase it for under $7.00 The power supply board is dead.That the board,where the power a/c cord plug into it.U know basic's electronic,have tools and know bsaic soldering? ...

where is the panasonic tcp42x1 power supply thermal fuse located The thermal fuse can be located at its power supply regulator board itself.

...mean. Jdvillanueva The Power Light Flashing 6 times indicates a fault with the High Voltage Circuit. Could be as simple as the Thermal Fuse having blow or could be other components that have