Question about Panasonic TH Televison & Video
video input. Usually when you have a red tint when using the component input i'ts because the wires are switched on one end or one of the 3 video wires is bad. See if blue and green are switched.I see
...automator universal remote, I cannot access video component 1 or 2 (they are grey on the screen), just the cable, TV or DVD inputs... The Video input is turn off in setup menu. Best regards ...
...video input jacks (the place of the jacks are there but no jacks). Is this normal? If so, how can I get this display unit configure so I can get component and video input accessibility? This model ...
Question about Panasonic TH Televison & Video
...input connector. You can still do it, but it will require some adapters or changes to your PC. If you're using a laptop, you have two options. If the laptop offers an s-video output, you can use a ...
Question about Panasonic TH Televison & Video
...Yellow white and red then it would go into the video input and put your TV in Video mode., If you have Blue red and green, it is use for component input, and you put your TV in component
...a red screen on my main component video input when watching tv. While others, like Video 2, etc., work fine? Please make sure that all the wires and cables are in the correct slots on your
no video my panasonic plasma tv only accepts audio and no video display i.e. dvd player . all connections were right and the connections from the hd cable box is working good , watching tv is fine . ...
...cable. canno t get to work only have the phrase no signal in upper right Have you tried using the video out and audio out RCA jacks from the directtv receiver and inputting this signal into the ...
...video board problem. Pl check input cables. Or give Hdmi cable input. Disconnect all inputs switch on u should get plain raster that is only dots on screen, or blue back screen, if nothing contact ...
Question about Panasonic TH Televison & Video
...input completely dead, can get a signal through the yellow video inputs, but even then the screen flashes a large white bar periodically The TV boards have got affected for sure. Might ...
21 questions posted
Usually answered in minutes!
300 Questions
174 Questions
154 Questions
131 Questions
120 Questions