Maytag MAH6500 Neptune Front Loading Washer w/Built in Water Heater "control board" Questions

...control board located on the bottom of unit called a motor controller ... it is possible the motor controller has failed.. prior to looking at it though check the main control board for failure such ...

...control board, the machine control board senses the motor is not turning when requested to run 1.Run motor control board diagnostic test. 2.Check motor control board for damaged components. 3.Check ...

control board for the older Neptunes. If the motor is not running at all, check that the main control board is sending power to the motor control board. If it is you need the motor/ motor control kit

...control board kits. Maytag upgraded the washer motors about 5 years ago, if yours is older it's probably got the older style motor. If that's the case you need to verify that the motor control board ...

control board i have a mah7500aww washer for which the the LCD touch control board is dead. I have power to the machine, and power to the board itself. The door light works too. unit was bought in Feb

...control board measures 325 vdc. I never get any output to the motor in normal operating modes with the control harness connected to the machine control, or JP4 disconnected for the motor control test ...

...control board? The service manual says do this: Runs For Five Seconds Then Shuts OFF: Suspect a communication problem between motor, the motor control board and the machine control board. Check the ...

...Control Board or other relay inputs. This is what I can tell from washer schematic. 120VAC comes into the machine passes thru and EMI filter is then distributed to the Control Board for +12VDC and ...

...control board. replaced with the Motor Conversion Kit. Still not work. The display panel does not turn on. Could it be the main control board or something else? Solved problem. Replaced main Control ...

...control board Recently you helped me with a problem with the control board of my Maytag neptune washer. The motor control board burned, and you adviced me to buy a new kit of motor and board, as the ...