Cuisinart DGB-600BC 10-Cup Coffee Maker "maker heating hot" Questions

how can i make my coffee hotter? i'm getting less and less hot coffee from this machine, is there anything I can do to make it heat the water more? The thermostat could be faulty, if still in warranty

heating element would stay on for about 2 hours before beeping and shutting off. Now the element shuts off immediately after the beeps indicating the coffee is brewed. Any thoughts on how to get it to

...maker. Water leaking in the DGB-600 is mainly caused by heated water escaping from its proper path. There is a rubber grommet on the underside of the upper part of the coffeemaker. (It contacts the ...

...hot. The water will rush past the seals. This solution involves heating the carafe. Be careful to avoid steam burns 1. Place the carafe on a stove top. 2. Slowly heat the carafe. (make sure you are ...

...maker. how can i fix it? Make sure you have the dial that sits on top of the filter basket turned to the open hole. Otherwise, it will not grind as it can not send the coffee grounds into the basket. ...

...maker will not pump This can be caused from three different failures; the heating element itself, the bimetal thermal switch that controls the heating element or a thermal fuse that has opened with ...

...from its proper path. There is a rubber grommet on the underside of the upper part of the coffeemaker. (It contacts the lid over the filter basket when the front door is closed.) The design in ...

DGB-600 grind & brew thermal coffeemaker This coffeemaker is leaking water from the bottom of the unit. Can it be fixed? I called Cuisinart about this. They were no help. Water leaking in the DGB-600 ...

Leaking coffeemaker Coffeemaker makes coffee but there will be a puddle of water under the unitwhen it is done brewing. If I put water in it and let it sit, there will be water under the unit, but ...

wont brew a full pot when i turn the coffee on it will grind the coffee but then will only brew 1 to 4 cups at a time im not quite sure what to do about this please help I had the exact same problem ...