Maytag Neptune Washer "stop machine shuting" Questions

...stop unless I turn off the water manually. check plastic hose out side of tub to pressure switch if ok replace pressure switch Check inlet water valves cold & hot one may be sticking open & ...

...Machine-Troubleshooting f the water taps must be turned off to stop the filling water, often the fill valve is mechanically staying open, this may help... ...

...stop without manually shuting the water valve. Hi, The soleniod valve is bad.... here is a tip that will help...the problem you have is with the same part but the opposite problem... ...

washer overflows Check water level switch could be bad or the hose could be stopped up. Take the hose off at the water level switch and blow in the hose you should be able to blow through it ,if not ...

...machine keeps filling and won't stop on either the wash or rinse cycle. It is also not advancing correctly on the cycle dial. Finally, it appears to be leaking out of the bottom of the machine. Any ...

...stop the machine from going through a spin cycle. Good luck and let me know if you have any questions on replacing the door lock. I will just need you to reply with the model number of the

machine controller will shut down and display an ?ob? for off balance. The lid switch must be opened at least once before restarting the cycle, if this condition occurs. Opening the lid will allow the

...machine. If I shut the water during this cycle it spins out fine but when the cycle reaches the off position it doesn't really shut off. Sounds like the timer is still on. I need to push the control ...

...machine, I did a load of towels, nothing unusual.....the washer did its routine right up to the last spin before shuting off, I noticed that the washer made less noise then usual when going into its ...

...something so that the cycles don't take so long to complete? no, the problem is the the valve that stops water from draining is not working. or not shuting off all the way, water will try to fill