Cold water trickles in tub. Hot water fine. Cold water trickles in tub of washer. Hot water fills tub fine. remove the cold water hose from the machine that is your service line feeding into it. a ...
...cold water trickle It takes soooo long to wash on cold. The water just trickles in the tub. If I move the water temp to hot it is normal. Other than the cold water trickle the machine runs well. ...
cold water trickle hot water runs good kenmore 70 series 909961 cold water trickle in hot water runs fast help turn off water valves at wall, disconnect the supply hoses from the washer. where the ...
cold water trickles while filling the washer tub. Warm and hot water run fine. I have removed the cold water hose from the machine, removed and cleaned the screen, and reinstalled the hose. Cold water
cold water trickles in cold water just trickles in, is it the soleniod? If so how can I check. i believe on the water valve where your hoses connect,they have screens or filters inside maybe it is ...
Question about Washing Machines
...Cold wash works fine. hot water only trickles and makes a humming noise. Cold wash works fine. Shortly before this, I heard a vibrating/water hammer type sound, again when used on hot only. sounds to ...
Question about Whirlpool Washing Machines
cold water in the rinse cycle of the washer just trickles the washer fills normally for wash cycle,but trickles during cold rinse Sounds like cold water solenoid is not opening all the way, its easy ...
Question about Frigidaire Washing Machines
Cold water trickling into washer - what would cause this? Hot water enters washer fine - cold has gone down to a trickle within the past few months. Hoses are not kinked & faucets are completely open.
...cold water trickles. There is a "good" flow of water (hot&cold) to the machine yet, the cold water trickles out on any cold setting. The hot water has great flow. What could be the answer? Sounds ...
cold water only trickles in... Cold water only trickles in Assuming you have good water pressure to the inlet valve, you probably have a blocked or faulty inlet valve...Not a big job....Good ...
143 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
947 Questions
680 Questions
658 Questions
