Panasonic Lumix DMC-FZ7 Digital Camera "put lends back" Questions

...put a little pressure in. Somehow, the barrel worked itself into the right position! The camera works perfectly know. Its worth a shot to save $$$. Be gentle!! Good luck. ...

...lends and clean electrical contacts on lens and camera body with moistened swab, Put back together. Remove battery with camera "ON" and hold down shutter button for about 30 seconds. Put battery back ...

...put it back in it reads-card locked-why? Make sure that you have not by mistake moved the Read only slide on the SD card take it out and but it back in the R/W position some times these are a bit ...

...put it back in. Mine did the same thing however I noticed that the error does not appear when the XD card is not inserted in the card. I opened the bottom door and used a thumb tack to hit the little ...

...screen and it refuses to take pictures. I've been solving the problem by taking out the battery and putting it back in, then it works for a while. Now, it's getting worse. I lend the camera to my ...

...put in on the table with contacts upwards, corner cut top left, then the slider is on the right hand edge, about 1/3 the way down. If it is slid to the top position (nearest the contacts) the card is ...

...back. Well, I followed the steps in the manual to reset the camera and every time I got to the last step, the message Busy appeared on the screen. This happened about 5 times before I surrendered. ...

...put in on the table with contacts upwards, corner cut top left, then the slider is on the right hand edge, about 1/3 the way down. If it is slid to the top position (nearest the contacts) the card is ...

...put in on the table with contacts upwards, corner cut top left, then the slider is on the right hand edge, about 1/3 the way down. If it is slid to the top position (nearest the contacts) the card is ...

...put a second SD card in the camera and reformatted the card. A picture or two may come out normal after reformatting the card, but once there is a bright spot in the picture, the white comes back and ...