...self diag. It will run the water valves, tumble, dispenser, drain and high spin if you entered it right. If everything passes you will get a PA in the display. If not you will get the error code. You ...
...run the spin cycle twice it usually gets it enough to be able to move to the dryer. Using resources on the internet, I have attempted to diagnose the slow spin. Two years ago I had similar issues and ...
...test mode and did a self diag. After a short tumble, the humming sound came back and the SC code appeared in the display. The sound goes down in intensity with time and eventually goes away. I got a ...
...self may be shot. Most machines allow you to remove the back. If the belt IS off, then fit it to the MOTOR first, then slip it over the edge of the large wheel on the back of the drum and turn the ...
...run a full cycle, with at least 10 minutes of agitate time, listen at the beginning of the final spin (don't interrupt it by lifting the lid). After the agitate time has expired in rinse, it should ...
359 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
947 Questions
680 Questions
658 Questions