...water when cold is selected Wife says hot water only no cold. Selectedd cold / cold and machine fills with hot water. ""Selectedd cold / cold and machine fills with hot water."" Is your machine a ...
Question about Maytag Neptune Washing Machines
...cold only. It might be easier to go into Service Mode to turn on and off the water valves while troubleshooting this issue. Enter Service Mode and use the keys assigned to the table at the bottom ...
Question about Maytag Neptune Washing Machines
the hot water is not shuting off, how do I fix. machine works fine if you use only cold water How to Troubleshoot Water Valve on your Washer
...Then check for cold water operation at fill valve. If no cold water after a few seconds then the problem is the water fill valve. If this doesn't help. Post findings for further troubleshooting. ...
Question about Maytag Neptune Washing Machines
...Cold water inlet valve on the left below. Dispenser valve for main fill and bleach/soft disp valve in the middle of pic. See this post for support on this site Post for Water Inlet Valve ...
...you may have a bad water inlet valve. Try filling with a water mix Hot/Cold will the wash tub will fill and proceed. If you need further troubleshooting support post back...........**** or ...
Question about Maytag Neptune Washing Machines
...water can never drain all the way cold water ok, ie if i turn off hot water valve at wall, then no problem how do i check the hot water valve in the unit or other troubleshoot tips replace the ...
...Cold water inlet valve operate then you have a bad solenoid or loss of 120VAC applied to that solenoid valve and more troubleshooting may need to take place and possible replacement of the washer ...
Question about Maytag Neptune Washing Machines
cold water continue to fill and over flood the tub. Pull the washer 120VAC power cord. Does water continue to flow into the machine? If yea you have a Stuck Open water valve. If know then you may have
...Cold water supplies to the machine and pull the supply hoses off the back of the machine and inspect the water supply inlet screens. They look like this; You could have a failed water valve solenoid. ...
1,827 questions posted
Usually answered in minutes!
2,979 Questions
358 Questions
175 Questions
151 Questions