Maytag Neptune FAV6800AW Top Load Washer "reset washing machine computer" Questions

...it will in service mode Switch it off at the wall for a few minutes , this may reset the computer, if not the control panel may be at fault, replacement can cost a lot on some machines so get a

...so computer would reset but it didn't work. its a maytag neptune. unscrew the soap cover. you will find a nylon cord usually red or green. pull that and the door will unlock. then replace the lock ...

...washing. I pushed the pause buttonn to continue thewash cycle and it wouldnt start. I would unplug the washer to reset it. if you have already hit the power button to turn the unit off and it failed ...

...reset the system by unpluging the machine and pluging it back up but I get an error message: Speed Indication Error. Is this something that need to be replaced? These machines are "known" to have ...

washing a load of clothes... 13 minutes remaining but the got a PF code. is there a reset or what? it stands for power failure. i would unplug the machine for 5 or 10 minutes and that should reset the

computer could use a reset once in a while. I would check you warr in you user man, sometimes they warr the motor on that unit for 10 yrs(certain models) and if its that old a neptune repair kit is in

...machine for around 15 minutes. Sometimes they can hang up. Unplugging it would cause the computer to sometimes reset itself. If it does the same thing when plugging it back in, its that touch panel. ...

...machine.....is there a reboot button??? Peace Friend, Huuum At your service! Like with an error code , Unplug the washer and wait a 6 minutes then restart it like rebooting your computer when its ...

...reset the computer and tried just the 'spin' setting....still...the water is still in the machine....not sure what to do. I thought a blockage too. abby Mine is doing this too. The "wax motor" that ...