fabric softener dispenser. If you remove the dispenser drawer and look into the cavity, there should be a series of holes in the upper part of the compartment where water sprays into all the dispenser
Question about Maytag Neptune Washing Machines
remove gunk build up. If there is a water flow issue into the Fabric Softener dispenser then further investigation may need to take place. I discuss how I would start the troubleshooting for that as a
...fabric softener goes into the dispenser. it may be a full blown solenoid valve -or- a flapper type of solenoid valve. operation of the solenoid operates a flapper to let the softener out. go to an ...
Question about Maytag Neptune Washing Machines
...remove some gunk. If there is a water flow issue into the Fabric Softener dispenser then further investigation may need to take place. I discuss how I would start the troubleshooting for that as a ...
Fabric dispenser, I will attach some pics of opening mine, figured I would it clean up, it was a bit ugly. Place a 1? putty knife, mine is a 2.5? could not find my 1? at the location shown in the pic.
Question about Maytag Neptune Washing Machines
remove the "L" shaped plastic holders. Use a pipe cleaner to clean out the tube where the water flows directly out of the unit, before entering the lid. I did this last night, and it works beautifully
Question about Maytag Neptune Washing Machines
...fabric softener dispenser is being filled (2nd rinse cycle only). Any help? The second rinse is when the softener cup is being flushed. Remove the dispenser and clean and inspect the housing to be ...
...Dispenser Valve is 25001043 you can order from this site or search the internet for best price try appliancezone.com? You can remove the Fabric Softner to clean see page 33 of the Service ...
Question about Maytag Neptune Washing Machines
...fabric softener dispenser will not empty out. Have rinsed the container but problem persists hello, so you cleaned out the dispenser and cleared the holes under the dispenser cap. low water pressure ...
Question about Maytag Neptune Washing Machines
...fabric softener solenoid valve is faulty and must be replaced. It is sold as an assembly with the bleach solenoid valve with part number 997846. You need to remove the front panel to lift the top ...
1,827 questions posted
Usually answered in minutes!
2,979 Questions
358 Questions
175 Questions
151 Questions