Maytag Neptune FAV6800AW Top Load Washer "manual transmission removal diy" Questions

...transmission. See this post Clutch Fix for removing the clutch and inspecting and re-lube of the One-Way Roller clutches bearing. You will find links to the Service Manual at that post. Read this ...

...manual does not call out a #20 Torx driver is required to remove the tumbler. If you think the grinding noise is very metallic and not muffled by a tub of water the grinding noise may be coming from ...

transmission problem. Take a look at the Service Manual page 37 on starts with tumbler removal and proceeds down to the transmission removal. Let me know what you find with the above test I?m an owner

...Manual for reference. Sears Parts Direct. Good Luck........Rich My fav6800 make a squealing show when in wash mode,   open front panel found a black tag like substance sprayed around the ...

...manual and was able to run the test mode to find that the tub would not spin on the tumblers would agitate. I cannot move the tub manually either direction. Is this the clutch or the transmission? ...

...Manual and Sears Parts Direct for reference. Raise the top of the machine. Insert a flat blade putty knife approximately 2.5? from the left and right sides of the washer top, depress the spring tabs ...

...transmission gearing but will move."" is wrong I can't rotate the tumblers by hand but check for that free wheeling tumbler. I'll add a comment about your request ""Is there a way to test the tumbler ...

...transmission, spin tube and basket. (It sounds a bit complicated but it's not really that difficult.) http://www.american-appliance.com/catalog/newsdesk_info.php?newsPath=16&newsdesk_id=137 You ...

...manual and go to the section troubleshooting they explain this . However if you do not have it download from .www.manualslib.com see this causes and fix it.God bless youTub Bearing If the washer is ...

...DIY manual and from a website, I felt that I can remove and replace both parts, if needed. However, the cost of either part is 1/3 the cost of new washing machine, so I wanted to make sure that I ...