Question about Maytag Neptune Washing Machines
...Lid Lock LED lit? If so further trouble shooting is required. I would next have you go into Service Mode. Once in Service Mode we need to go Board Output Test on page 16 of the Service Manual I will ...
...lid lock andat machine control board.• Push lid closed to make sure nothing from inside ispressing against it which may keep it from unlocking.• If necessary, remove clothes by disconnecting powerto ...
...lid lock was not unlocking. finally after repeated unplug-plug, etc. it unlocked. I snipped off the plastic hook on the washer (not lid) & now it won't go into the wash cycle. Evidentlly that ...
...Lid Lock Issue. For the FAV6800AW that is you machine type correct? The "LO" console error is "Lid has failed to unlock". I haven't experienced the "LO" error code to the display but this is the ...
Question about Maytag Neptune Washing Machines
Reconnect the lid locks wiring harness and push the top cover back into the cabinet until the latches lock up.Please let me know if the problem comes back for further troubleshooting and repair guide
Question about Maytag Neptune Washing Machines
Lid Lock, You can raise the washer lid from the base to remove your clothes from the wash basket with this process and the Service Manual . Don?t break the Left Hand Lid Lock latche if you do you will
...lock the Left and Right Lid Locks?.. did it? If the lid locked now press the Extra Rinse Key and this should Unlock the Left and Right Lid Locks?.. did it? Let me know and we will go from there. I?m ...
Question about Maytag Neptune Washing Machines
...lid lock which would require removal and very carefully opening up the case halves of that lid lock. Here is a pic of what we might find inside...... some corrision; Let me know if you want to try to ...
...unlock the lid. Push lid closed to make sure nothing from the inside is pressing against the lid, preventing unlocking. Is that the issue? Have the Lid locks failed to release and you can't open the ...
...lid lock to the top cover. Release the lid locks from the lid then reinstall them back into the top cover. Take the opportunity to visually check the lid locks and the harnesses for any obvious sign ...
1,827 questions posted
Usually answered in minutes!
2,979 Questions
358 Questions
175 Questions
151 Questions