Maytag Neptune FAV6800AW Top Load Washer "foriegn" Questions

...on and is filling with water . Drain pump filter checked and other than soap suds, no lint or other foriegn objects found. All hoses intact and definetly not leaking from hoses. Was this problem ...

...water pump. Your lines or water pump impeller may be blocked with animal hair, cloth fragments or foriegn materials.) The Impeller is an internal "Fan" that forces water thru the water pump) Check ...

.../ Spin End lights lit. Any help greatly appreciated. Regards. K. i would check the lint trap for foriegn bodies, e.g hairclips, hair bands, screws etc as these can cause the pump to stop working, ...

...take the side hose off and unclip the pump from machine and look in to see the propellor may have foriegn object

...it to the end of the drain hoseand removed all the water the check you drain pump for any kind of foriegn object that may be stopping the impellar wheel.the door lock may also be bad, the last but ...

...pump attached to the motor. remove the pump by realeasing the two long clips in there and see if a foriegn object is lodge in there. a problem with the centrifugal switch will require replacing the ...

...is not blocked but it has a noise coming from the pump! have checked the pump & theremis no foriegn object there so do u thing the pump has gone? Well yes, that or the Controller isn't

how to access drain pump on maytag neptune FAV6800 top loader washer need to check pump for foriegn objects The drain pump can be accessed by removing the rear panel and following the hose down

I had bought this washer used. I am in a foriegn country so I can't find help. The washer works fine until the spin cycle. It spins but not fully. The clothes dont get dry as they should. Still ...

...the hoses off and verify that it has drained. Sometimes it works just fine. Make sure there is no foriegn objects in the tubes or drain pump. You might want to replace the drain pump and If it