Maytag Neptune FAV6800AW Top Load Washer "fav6800 service mode" Questions

fav6800 maytag washer into dianostic mode You need the Service Manual; Here are some handy links; The Service Manual for reference. Sears Parts Direct for reference. From Page 14 of the Service Manual

Service repair manual on this site search for this; FAV6800 Manual. Check the postings and you will find a URL to the manual. From another member a step by step to dump water from machine in diag mode

Service Manual for reference. Sears Parts Direct for reference. The Part Number for the Dispenser Valve is 25001043 you can order from this site or search the internet for best price. Good luck??.Rich

FAV6800 AWW will not complete spin cycle. I open top after it stops, close it again and it starts, then stops again after a few minutes. If I can get it to go thru complete cycle,the clothes are heavy

...FAV6800 model. It does not pump out water after the cycle. When I lifted up the top cover, the whole drum was wobbling like crazy, and the machine could not even spin up to higher rpm. I recently ...

...FAV6800 that I just got from a relative. He said it wouldn't complete the spin cycle. What I found is it started the wash cycle got to drain the first time and did drain but gave a nd code for not ...

...FAV6800 will not finish a cycle? The washer has been sitting for about 7 months not being used in storage while I was moving. I recently hooked it up. I can usually get it to Wash then Rinse (but not ...

...FAV6800, Stops at 34 minutes and will not stop, finish or unlock. Hello AlpineCA, I believe you are failing in spin cycle but that?s a wag without any error codes to go on. With no error code it will ...

...fav6800 maytag washer, I am getting a UC code. If the drain is blocked in someway will it give this message? the machine works fine till it comes to the rinse and spin and then error code comes up. ...

FAV6800 model - We had major water damage to our basement due to the water over filling the tub. Would you be able to provide guidance on what the pressure switch looks like and how to remove the part