Maytag Neptune FAV6800AW Top Load Washer "bowl washing machine centre" Questions

machine is level and if after it has spun, the bowl is in the centre. Remove front cover and inspected all the springs that hold the bowl onto the lower chassis. The bowl should be balanced in a round

Washing Machine has dirt coming through the tub, leaving dirty marks on washed clothing. This is 2nd occurrence within 2 weeks. Have removed centre rotating piece, wiped out barrel of any foreign ...

centre of bowl and pressure tube is not kinked,can also mean pressure tranducer on motor control board could be faulty, note check for obstruction between inner and outer bowl( missing a sock perhaps.

gw609 wont spin without bowl banging very unbalanced nomatter how many times we rearrange it Probably find one or more of the suspension hangers has broken plastic top or bottom sections and therefore

...washing machine, labelled Ellite 1210 in Australia, occasionally leaves an oily smudge on some items being washed, typically sheets and pillow caases. The smudge is yellow on the outside with a dark ...

...bowl should be centered Hi, It sounds like one of two things. The washing machine isn't level. Look underneath the washer and check the feet, sometimes concrete or floors aren't level and you have to ...

Water is leaking from the centre of the bowl from the shaft sillicone your tub seal is bad, about $35 for seal and kit

...machine & let it hang.The bowl should just lift straight out.Be carefull,the outside of the metal bowl is like a cheese greater trust me! PS when you put it back together & you lower the top ...

...washing machine model 1W711E that always appear with the fault code 130? Fault code 130 means the RPS (rotor position sensor) is not sending correct signals to the control board. The RPS is a small ...

...& P washing machine. What do you mean by the white plastic fan? Do you mean the round bowl part of the motor in the centre or the small fan on the drain pump on the front right corner of the