Maytag Neptune MAH5500B Front Load Washer "wont run" Questions

I have the neptune front loader. The lock light wont come on and the door wont lock. During a wash cycle the water just started comming out of the door. If I hold the stop/start button manually the ...

...wont stay locked to run a load I shut the door and hit start and the machine starts to cycle then a couple of seconds later it shuts off and door is unlocked - I checked the door and when it says its ...

...wont finish a rinse cycle a code comes up and says suds, then when i try to run a rense cycle a code comes up and says nd,please tell me how to fix this we had the same problem with ours....nd means ...

...wont run my neptune will start to fill with water but that is as far as it goes it will not agitate or do anything besides the initial filling though the minutes on the timer do tick down any ideas? ...

wont run When I select the cycle (delecate) the washer began to work then unlocked the door and stoped. Now when I selct the cycle the door locks and then unlocks and stops????? what can I do? faulty ...

I found a nickle in mine and removed it but the nd warning is still going and it wont run a cycle. May have broken the vanes off the impeller. Pump would need to be replaced.

start button want stay on press start light comes on and go out washer wont run,Model: MLG 2000 AWW , Super stack SL-3 this is most likely to be upper control board/located in the top of dryer

Drain but wont spin If the motor is running during the spin cycle, your belt is slipping or broken.

wont run lights come on but wont run If the belt is not off, it may be a loose wire to the sensor that switches the dryer off when the belt is off or broken. Mine had that problem. If that doesn't

wont run error code lf my washer wont fill up and is blinking Sd this means long fill.try disconnecting water hoses on washer and inspect screens were hoses screw on ,if they look rusty or dirty clean