Question about Maytag Neptune Washing Machines
...stops and becomes silent....I'm not sure what's wrong with it...is there any way to reset the electronics or is this a mechanical problem... I'm and owner and will try to help. Are you handy and do ...
Question about Maytag Neptune Washing Machines
stops, it will not go lower than 10 min. when I take the clothes out and leave it empty with water, and set it to spin, it will complete the cycle. Hope this is not a double reply, I'm having problems
Question about Maytag Neptune Washing Machines
...stops about 10 min. before finished and flashes uc See this post Clutch Fix to see what is involved to re-lube/replace the clutch in the FAV6800A or FAV9800ATL. If you or someone you know has basic ...
...stops and a Lr massage appears on the screen. I open the door, move around the clothes in the barrel and press start. After a few minutes it starts again and completes the cycle. Unplug for 10 min to ...
...stops on rinse cycle hey i just got this washer and used it for about 3 weeks. It has started stopping on the rinse cycle with 10 min left and says "DC" on the display what does this mean??? DC= ...
Question about Maytag Neptune Washing Machines
10 min complete. Does the Spin Only cycle complete with no clothes in the wash basket? Some handy links if you are going to DIY.........Service Manual for reference Sears Parts Direct for reference...
Question about Maytag Neptune Washing Machines
stops on the spin cycle (~11 min). I can see and hear the tub tumbling kind of hard even though it has small amount of clothes. I already removed the clutch and lubed with light grease the bearings. A
...10 Posted this in someone else's thread, but as my error code is different, decided it would be better to start new thread. I am having a similar issue as all the people who have posted dc codes. ...
Question about Maytag Neptune Washing Machines
...min mark in Quick Wash cycle is the start of the first spin cycle. What most owners don?t realize is this machine is designed to begin the spin cycle with a fair amount of water in the wash tub. When ...
...stops to make it work again until the wash is over. Does anyone know what's wrong or what is causing this to happen? Unplug the washer for 10 min to reboot the curcuit board. This will clear the ...
3,973 questions posted
Usually answered in minutes!
1,498 Questions
358 Questions
175 Questions
151 Questions