spring clips. One screw on each side will now release top panel and it will hinge up. Prop up with broom handle or something. Now you can get at everthing. Rubber gasket is held onto drum with a cable
Question about Maytag Neptune Washing Machines
...will release top /be sure to remove the dist cover 4 screws on top. lift top . you will fint a spring and wire running around boot . pull togther to relace . remove boot . reverse to install boot ...
...release the main top . 4 screws from inside the corners of soap dispenser need to be removed. The door seal itself is simply "snapped into the front cover, grab hold and pull it off. the inner ...
...spring clips. One screw on each side will now release top panel and it will hinge up. Prop up with broom handle or something. Now you can get at everything. Rubber gasket is held onto drum with a ...
release the spring clips it hinges up and back,then you will see two clips holding the back metal panel to the cabinet,use a flat screw driver to release those open the lid and grab the cabinet,tip it
...spring-loaded steel band which holds the seal in place with some long nosed pliers, and pull away the seal from the front of the machine. Remove the kickplate at the bottom which is retained by two ...
3,973 questions posted
Usually answered in minutes!
1,498 Questions
358 Questions
175 Questions
151 Questions