...is still about a half an inch off I suggest you check your drum bearings, belt will only come off if misaligned. replace motor hanger bushings they wear out old ones are rubber the new ones are ...
belt on the back of tub keeps coming off every time i put it on......why?? either the belt is not on the right set of grooves on the motor pulley or the belt is stretched and needs a new belt
Question about Maytag Neptune Washing Machines
...able to look inside while it is running (KEEP CLEAR OF THE ELECTRICS AND DO NOT DELVE INSIDE WHILE THE MACHINE IS IN THIS STATE!) and see the belt slipping. If it is, it's probably time for a new ...
Question about Maytag Neptune Washing Machines
...new belt over the motor and drive pulleys.Pull the motor back to apply tension to the belt and secure the tension bolt with the socket wrench.It may be necessary to angle the handle of a hammer ...
Question about Maytag Neptune Washing Machines
...Belt change help How a washer works, good to read this first How does the agitator come off my washer? How to prevent socks from getting into your pump Help for storing an appliance Important ...
Question about Maytag Neptune Washing Machines
belt driven pump on this machine. Maytag redesigned the lid switch for this machine because of this problem. Try a new lid switch first. It is possible that the problem could originate from the timer.
...belt doesnt spin, which may be normal. I am wondering if when you wash and it reachesa point it needs to drain the water does the cyce spin at the same time (we are talking about 6 minutes into the ...
Question about Maytag Neptune Washing Machines
belt wasn't as tight as it could be, so I put a crow bar in there and pulled it good and tight. That seemed to do the trick except for light loads. If the washer is loaded tight, it works great. Throw
Question about Maytag Neptune Washing Machines
...new. try taking the belt off back, then turn motor and drum by hand separately, motor should not be heard. drum will have slight hum but no whine or pops mine started just like that then went on to ...
...Maybe it cause a too tied belt. Check that the new belt corresponds to your model. If it is ok, maybe there is problem with pulley itself or you need new bearings. Check and replace if
3,973 questions posted
Usually answered in minutes!
1,498 Questions
358 Questions
175 Questions
151 Questions
