...machine to fix it. THERE IS SCREWS ON THE BACK SIDE OF THE PANEL, REMOVE THE SCREWS AND PUSH FORWARD A LITTLE WHILE PULLING UP AND IT WILL LAY DOWN RIGHT ON TOP OF MACHINE, THAT IS WHERE I FOUND ...
...back of the machine,make sure the machine is unplugged.water will come out so first try syphoning the water out of the machine.if the drain hose comes out from the bottom of the machine then just lay ...
Question about Maytag Neptune Washing Machines
...back and you can see the belt tensioner laying there on the floor of the dryer. Most likely someone turned the drum the wrong direction and the belt came off. The belt goes through the opening in the ...
back flap and there it was a nickel laying flat. I pressed on it with a screwdriver and it flipped around so I could get it out with a pair of needle nose pliers. I put it back together it worked like
Question about Maytag Neptune Washing Machines
...suspect you could have a Tub Seal leak issue. I would lay the machine on it?s back protecting the drain hose exit and tap lightly with a hammer and see if you can free. Let me know if I can ...
...machine is not level side to side, and esp. front to back, all the water would not find its way to the pump. Front loaders have the drain fitting at the rear, so a bit of forward tilt would leave ...
...laying in the machine and you are out of the way. There are spinning parts and live wires once you turn the machine on. Stay clear, and watch your hair and hands. Once the machine is full and starts ...
Question about Maytag Neptune Washing Machines
HOW TO I GET INSIDE A NEPTUNE DRYER MODEL 9700 TO FIX A FUSE Unplug the unit. Remove the top panel(two bolts in the rear metric 10 or Phillips will work) There are four screws across the top front of ...
Question about Maytag Neptune Washing Machines
machine is trying to run the motor but is unable. Usually this the motor control board that is at fault. The first thing to do is make sure the belt is on. After that some tests are have to be made to
Question about Maytag Neptune Washing Machines
...laying in the machine and you are out of the way. There are spinning parts and live wires once you turn the machine on. Stay clear, and watch your hair and hands. Once the machine is full and starts ...
3,973 questions posted
Usually answered in minutes!
1,498 Questions
358 Questions
175 Questions
151 Questions
