...control board, the machine control board senses the motor is not turning when requested to run 1.Run motor control board diagnostic test. 2.Check motor control board for damaged components. 3.Check ...
...through and retrieve all diagnostic codes. You will also find serveral other diagnostic service notes. Read them and follow the instructions to test the motor, motor control, and main control
...all diagnostic codes. You will also find serveral other diagnostic service notes. Read them and follow the instructions to test the motor, motor control, and main control board. Hope this
...control board and machine control boards and they don't show any sign of damage. I also did the dianostic test on the paper that I found in the back of the washer, I did the drive system diagnostic ...
...Control Board Output Test. Motor Control Board Output Test 1. Disconnect power to the washer. 2. Remove the front panel and pull the JP4 Connector from the motor control board. The following Quick ...
...control board. it has to be checked. if not familiar with doing this then you can get it checked by local appliance repair technician familiar with this brand and model. You can get required parts ...
Question about Maytag Neptune Washing Machines
control board (inside the control panel). Before you replace the board, try this diagnostics test, Press and hold the hand wash key and the heavy soil keys for 3 seconds. The display should go to "00"
Question about Maytag Neptune Washing Machines
Control Board sees analog DC swings from the TDS not a digital 1 or a 0. Was your washer banging around during the start of a Spin Cycle of a wash Cycle or a Spin Only Cycle causing the original dC/uC
Question about Maytag Neptune Washing Machines
...control board. ? Check Tub Displacement Sensor for 0 to 3.0 Volts DC output voltage between ground and the board input. Check for 12 Volts DC input voltage between the ground and the board output. ...
...control board diagnostic test first. How ??? please help. maytag neptune digital front loading. No motor test required , you need to replce the motor and motor control kit I have appliance experince ...
3,973 questions posted
Usually answered in minutes!
1,498 Questions
358 Questions
175 Questions
151 Questions