Question about Maytag Neptune Washing Machines
...we had a power outage and now all led light on the cycle dial a flashing twice then pause for about 15 sec. and do it again. Even though you can start the washing cycle the flushing is interrupting ...
...5d means you're using too much detergent. SH: Open thermistor. Unplug appliance and let rest for 15-30 minutes, then plug back in. If code continues, unplug appliance and call for service. bP: ...
Question about Maytag Neptune Washing Machines
...more troubleshooting? If so I would see what the results are of a Quick Service Cycle test on page 15 of the FAV6800A/FAV9800A Service Manual. Go into Service Mode with this process for the FAV6800A ...
how much water should this washer use on light soil setting According to maytag the washer will use a total of 15 gallons for all cycles Almost 4 gallons
...START BUTTON IS FLASHING AND WASHER WILL NOT START you can try to reset it by unpluging for about 15-20 mins to let it reset itself. hope that
What can I do? ND is NO drain The water level fails to drop below the Low Water level reset within 15 minutes, before a spin begins
175.00(varies)the labor (please sit down)yes, is high enough for you to go out and find your self a 15 year old Maytag top load, re-build it,scrap the front load,and never see a repairman for the next
Question about Maytag Neptune Washing Machines
It is VERY loud on the spin cycle - both at 15 minutes (softer) and at the final 5 minutes (really loud). hi,this sounds very much like the bearring have worn out,to check this open door and lift ...
...and drain the time goes to zerro and will not drain water out. u will need to unplug it for about 15 mins to let it ...
...spin cycle starts, the drum rocks heavily even when empty, and the motor stops momentarily. About 15 secs. later it starts again with same result. This continues until the timer stops. need more ...
3,973 questions posted
Usually answered in minutes!
1,498 Questions
358 Questions
175 Questions
151 Questions
