Maytag Neptune MAH6500A Front Load Washer "softener dispensing" Questions

Fabric Softener Won't Dispense The fabric softener dispenser does not dispense. The soap and bleach do dispense. The fabric softener dispenser is notorious for clogging. Liquid fabric softener is ...

MAH8700AWW - No Fabric Softener Machine works great, but the wife informs me it no longer dispenses Fabric Softener. Manually checked soleniod valve, jumped it with 110 and all solenoids work fine. ...

...clarify if by won't drain. Does it look like no water flow is flushing the the Bleach and Fabric Softener dispensers? The Fabric Softener dispenser could be clogged but I suspect the dispenser?s ...

...softener not dispensing,vibrates on spin cycles! Makes noise during wash & rinse cycles in back of machine like it is humming.During spin cycles,it vibrates.The washer will move a little out of place ...

...softener and bleach dispensers stopped working and are not dispensing into the machine at the appropriate time. Any advice on what needs to be repaired or replaced? I don't have a schematic for the ...

SOFTENER DISPENSER DOES NOT WORK THE MAIN PROBLEM I HAVE IS THE SOFTENER DISPENSE DOES NOT DISPENSE, LEAVES THE SOFTENER AND WATER IN THE DISPENSER. THE SIPHON HOLE IS NOT CLOGGED, IT WILL WORK ...

fabric softener dispensor does not empty The fabric softener dispensor does not empty and the wash does not seem to be clean or smell fresh. For the FAV6800A or FAV9800A: If you have no water flow to ...

...fine on regular loads until it comes to spin cycle again and it will stop and flash nf 3. my fabric softener dispenser will not let the softener out neither will the bleach dispenser.....can anyone ...

...of door. Water pours out like a water fall.Any ideas? tHE PROBLEM IS YOU NEED TO CLEAN YOUR SOAP, SOFTENER AND BLEACH DISPENSER, REMOVE THE BLEACH AND SOFTENER DISPENSER TRAY, AND YOU WILL FIND

Washer will not dispense softener, rinse cycle runs through the detergent side When the washer goes into rinse cycle the water fills the detergent side and not the softener side. When I start the ...