...shutter sensor. 0002 is that the shutter is moving but on/off detection timing is off. When the copier is powered up you should here this shutter trying to find the home position. If the error occurs ...
...shutter open sensor does not go on. (The shutter does not open.) 1. Check the shutter home position sensor. Is it normal? 2. Check the wiring between the finisher controller PCB and the stack feeding ...
...sensor shutter. As a result of that, it may be faultily detected as ATR sensor fault and trigger the ATR sensor error (E020-XXXX). The detail codes (xxxx) are as follow: XXA0, XXA2, XXA8, XXA9, XXC0, ...
shutter open sensor (PI5) is faulty. The safety area detecting switch (MS3) is faulty. The shutter closed detecting switch (MS4) is faulty. The No. 2 feed motor (M8) is faulty. The finisher controller
shutter open sensor (PI5) is faulty. The safety area detecting switch (MS3) is faulty. The shutter closed detecting switch (MS4) is faulty. The No. 2 feed motor (M8) is faulty. The finisher controller
...Shutter HP Sensor (PS53) (if the Sensor operates normally). 4. Check the drawer of the Fixing Assembly and the host machine. 5. Replace the Fixing Assembly. 6. Replace the Main Driver PCB (PCB2) ...
Question about Oki Electric Industry Office Equipment & Supplies
...3: Check to see whether the sensor shutter opens and closes normally, by the MOTOR & CLUTCH TEST of the self-diagnostic function. If the shutter operates imperfectly, replace the shutter
...motor , ? Shutter closed sensor ? The shutter closed detecting switch does not turn on even when the feeder motor has been driven in reverse for 1 sec or more. clear dust from the finisher ...
Question about Oki Printing Solutions Office Equipment & Supplies
shutter error and sensor calibration error on OKI C9650 Printer The shutter protects the density sensors and keeps the windows on the sensors clean, until they wear out. Replace the shutter assy (part
...E000840-0001...???? There is a shutter error. Check the connection of the connector of the shutter motor and the shutter HP sensor. Hi my copier is showing error code e000840-0001 canon ir ...
449 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions