Canon DC100 DVD Camcorder "read disk" Questions

read any disk, and makes noise when reading a disk and does not start reading, then the problem concerns either motor assembly or lens pickup. If the disk is spinning and lens had been cleaned already

NOT READING MEMOREX DURALAYER MINI DISKS JUST BOUGHT NEW MEMOREX MINI DVD + RW DISKS AND CAMCORDER WILL NOT READ OR INITIALISE THEM oLD FUJIFILM AND CANON DISKS FINE yeah I got the same problem the ...

...read that format After inserting disk I receive message: Unable to recognize the recording mode of the disc. Can't see any previous foto and video on camera. Also can't finalize disk (nothing happens ...

read any disk. It just says "no disk". What might be the cause? The problem is the Laser lens. The lens is dirty or defectives, and cannot focus anymore on the laser beam reflected by the DVD, to read

...read the disk. the codec of the camcorder is not installed so the Pc can't read the video format. use for exemple dvdplayer you can download it from this link it's ...

...inside the drive. If you don't hear anything then something is wrong with the read laser. It's either damaged or burned out. The laser must focus, read, and then spin the disk to not show "no

...read the disk, check the disk" error. I bought new disks, initialized those and got the same error. I put in a disk that I have previously recorded and it plays it just fine. Am I initialized ...

...read it. To finalise the disk, connect your camera to the power adapter, plug the adapter into a wall socket, and switch on the wall socket, then switch on the camera. To get to the finalise step. ...

...READ THE MINI DVD DISK THAT I PUT IN I was video taping outside and i left the cam ra on the table and when i came back was shut off but i still had baterie so i turned it on and i said no disk even ...

read these formats. To finalise the disk you must have the power adapter connected to the camera, plugged into a wall socket and turned on. Then, switch on the camera, put it into playback mode, Press