...put it on? Please help... Yes, you can buy another pig tail with the set up you have incoming. Just be sure when you remove your old one, you note which wire goes where. Yes you can. The 2 flat ones ...
...volt meter to make sure you have 220 volts coming to the dryer. Second,if voltage is ok,remove the back panel from the dryer and check continuity on the thermal overload fuse attached to the exhaust ...
...put it back in. still won't turn on. i can't find a model name or number printed on the machine. i just bought this house and the previous owners did not leave the manual of course. i know its not ...
...put a large load of clothes, which probably should have been spun again, into the dryer. When I returned the clothes were still basically wet, and the light in the dryer would not come on, and nor ...
Question about Dryers
...220-volt line usually has 11 ohms resistance. Check dryer Terminal block prongs both outside prongs should give combined 220, and 110 each if u check 1 outside & 1 center (ground) prong. Also ...
220 volts Check the breaker for the correct amperage cut off. If the unit had an obstruction in the air flow, it would not trip the breaker. Try running the unit with just cool air and see if it trips
968 questions posted
Usually answered in minutes!
1,743 Questions
867 Questions
489 Questions
196 Questions
146 Questions