[email protected] This error is the print head is not installed [1401], or it is not properly installed (Print head temperature sensor error [1403] / Faulty EEPROM data of the print head
...print head is faulty) [1403 / 1405]. Install the print head properly, and close the access cover. Or, with the print head installed, turn the printer off and on. This might help change your cartridge ...
...print head is faulty (error code 1403 or 1405). Make sure the contacts on the printhead are clean, re-install and try again. If this fails a new printhead may be required. You may be able to ...
...print head is faulty (error code 1403 or 1405). Make sure the contacts on the printhead are clean, re-install and try again. If this fails a new printhead may be required. You may be able to ...
Question about Canon PIXMA Office Equipment & Supplies
print head is faulty) [1403 / 1405]. I'm guessing that you've been using this printer and printhead for a while though so it's more likely that the printhead is dead and you need to purchase a new one
not properly installed (Print head temperature sensor error [1403] / Faulty EEPROM data of the print head [1405]). If you wish to get more details about this; visit the site linked here; after an hour
Question about Canon PIXMA Office Equipment & Supplies
...print head is faulty) [1403/1405]. 6 times The paper output tray is in the CD-Rprinting position. 7 times NO CD-R/DVD-R 8 times Warning: The waste ink absorber is almost full (approx. 95% of the ...
...print head is faulty) [1403/1405].Install the print head properly, and close the access cover.Or, with the print head installed, turn the printer off and on.8 times Warning: The waste ink absorber ...
Question about Canon PIXMA Office Equipment & Supplies
...780 it says wrong cartridge problem #1403 - where can I but the print head to replace? Here is the Cannon LINK for supplies. If you need more help come back.Post / thumbs / testimonial are
1403 yelo led blinking hello this error means that the EEPROM data of the print head is faulty so is a problem with the print head, Install the print head properly,and close the access cover. Or, with
749 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions
