Canon PIXMA MP830 All-In-One InkJet Printer "telephone cables used fax" Questions

...test the cable from the wall jack to the fax, you could install a Y to plug a working telephone with the fax on the same line to spy on what is happening when the fax is engaging a connection.

...you'll see 2 rj11 jacks. Those are the standard telephone jacks. Use a standard telephone cable (male rj11 on each end. Put one end in the lower jack and the end into the wall jack for your FAX

...Telephone" port on the back of the Fax/Printer. When I switched it to the "Line" port, suddenly the clicking stopped and the Memory/In Use light went off. Now we will see if I can Fax something. Hope ...

...telephone wire from fax connect to? canon mx700 Hello.One end connects to the printer, the other directly into the wall socket for your telephone. Make sure it is not "behind" and Modem filters you ...

...telephone. Fax machine is set on receive mode. Nothing happens. What now? And how long does it stay in memory. Must i leave it on until Monday when canon tech support is available? most probably your ...

fax capable, disconnect the telephone line cord from the device. Disconnect the power cord (also referred to as adapter) from the device. Shut down the computer. Wait for approximately ten seconds and

...but i do not know which one to choose?? You need the cable that looks like a telephone jack where you can connect it to your printer and to the phone line so you can use the fax service of

...telephone line for FAX use only. MANUAL MODE: When you receive mainly voice calls and sometimes faxes, or want to receive faxes manually. ANS MACHINE MODE: When you want to receive voice messages on ...

...fax from telephone line. 2.unplug your fax from the computer. (remove all connections and just leave power plugged in Suggestion (if you have another phone plug it in and make sure you have a dial ...

...Telephone provider for assistance. In addition, pls check your cables, and connections. Regards! Pls. don't forget to mark! thank you for using Fixya.com. please try to log it off and check carefully ...