Question about Canon PIXMA Office Equipment & Supplies
your purge unit isnt cleaning the print head properly. try to lightly clean the printhead with warm water. If that doesnt work you can sometimes find the printhead online for cheap and try that method
...doesnt show magenta? Your printer works with the BCI-6 cartridges, that are in fact just ink-tanks, the printhead being apart of the tanks. So if the cartridges are not empty, it cannot be because of ...
...doesnt matter if you replace the cartridge, the problem is in the printhead. If the problem occured just a while ago, you should consider that NOT PRINTING a long time (30 days) with a printer can ...
...doesnt matter if you replace the cartridge, the problem is in the printhead. If the problem occured just a while ago, you should consider that NOT PRINTING a long time (30 days) with a printer can ...
...Doesnt look terminal, at worst may need to replace the Print Head. Hope this helps. remove the printhead and clean the underneat replace it. the orange blinking will stop. i'm printing now. Larry ...
Question about Canon PIXMA Office Equipment & Supplies
...Doesnt seems the printhead is clogged. May be have air on the system (tubes). Dont know. Im asking for help pls. If someone know and dont mind to share the solution, i appreciate your help. Turn Off ...
printhead is severely clogged, you may have to repeat the soak.Let me know if this clears the problem. Good Day, If your yellow ink is not printing, please check first the ink level of the yellow tank
Question about Canon PIXMA Office Equipment & Supplies
...key and select Print Demo Sheet. c.Press OK button. If demo page doesnt have black ink or faded prints,the printhead on your printer require replacement. Call 1.800.421.6699 Thanks. Regards, ...
...2x then try printing again, if you have the same issue, a possible printhead replacement might be needed, conatact support at 1-800-421-6699 Kodak doesnt allow manual cleaning of the ...
...printhead is not printing then you should start by checking the print supply. The supply doesnt have to be completly empty to fail. Replace those that are low. The jets may also be clogged. This is ...
188 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions