...flashing if they need changing) and this will bring them to the middle. Once you have the cartridges in the middle they will either clip out by pressing down on the side nearest to you or there will ...
...middle light is on. I haven't noticed any amber lights flashing - always green. Can you help? Please check for torn piece in the carriage which is causing the error How many times does the flight ...
middle button (flashing orange) and hear sounds, rollers turning etc., but no paper feeds in. Yesterday a paper fed in scew and came out with one edge torn. ( I think it all came out.) I tried setting
...colored inks and the small black, now the middle orange light is flashing and I can't get it to print press and hold the 2 top buttons on the printer for about 5 seconds - this should reset the ...
Question about Canon PIXMA Office Equipment & Supplies
...middle all full cartridges should be lit up. If the light is off on any/all cartridges it means they are empty. If the light is flashing it means it is running low. Each cartridge has a clip on the ...
Question about Canon PIXMA Office Equipment & Supplies
...middle of a printing job. The light is flashing green alternating with orange. The ink cartridges seem to be jammed on the left side of the printer and will not move. I turned the printer off and ...
Question about Canon PIXMA Office Equipment & Supplies
have a Canon MP830. in the middle of printing, it came up with error code 6A00, and now all it does is flash the alarm light and copy light. how to fix? ...
...FLASHING ON B AND C WITH SOLID LIGHT ON THE TRIANGLE WITH A JAGGERED LINE IN THE MIDDLE. TRIED TO USE REFILLED CARTRIDGES BUT IT WOULD NOT ACCEPT THEM AND NOW TRYING TO USE ORIGINAL CARTRIDGES it is ...
Question about Canon PIXMA Office Equipment & Supplies
...MIDDLE BUTTON FLASHING YELLOW AND WILL NOT GO OFF WHEN PAPER IS LOADED AND THE BUTTON IS PUSHED. THE COMPUTER SAID TO CANCEL ALL PRINT JOBS AND TURN THE PRINTER OFF THEN BACK ON BUT THE PROBLEM STILL ...
Question about Canon PIXMA Office Equipment & Supplies
All the ink tanks are not lite up. I was in the middle of a large print and before I put the first ink tank it did not light none of the ink tanks were lite. There are a couple of possible problems. 1
649 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions
