Maytag Neptune MDE5500AY Electric Dryer "loose" Questions

inside of drum baffles coming loose on maytag neptune dryer Hello. Remove the door and the plastic pieces on the opposite side. Take the front panel off. There will be one metal bracket on each side ...

...right back up. It may or may not blow the fuse again numrous times. Bad breaker in the panel box.Loose wires at the breaker. Loose connection in the wall outlet. Loose connection at the dryer cord ...

... Hi. That's a pretty strong son you have there! But seriously folks.... Unplug the dryer. Check for loose connections (screws) at the latch and catch. Tighten up anything loose. If this doesn't get ...

...dryer, it started sparking on the plug that goes on the wall, what could it be? thanks You have a loose connection in the wall plug would be my first guess and is shorting out, you need to turn off ...

...Control Board. Make sure the RED wire on the Control Board that connects to the Heater Relay is not loose or burnt. This is the LINE ONE voltage supply to the Control Board and if it has a bad, loose ...

I have an LD9334 Dryer with a noise when the drum turns. One of the fins inside has a loose screw and is hitting the top as it goes around. Does the top of the dryer come up or do I have to fix from ...

something loose or vibrating-how can we remove top something loose or vibrating-making lots of noise. How can we remove the top or back of dryer to see if something obvious is loose or out of place?? ...

...circuit breaker, it's possible that the circuit breaker itself is malfunctioning. or a wire is loose to breaker. There could be a loose connection in the outlet. A loose connection in the outlet ...

i have a maytag neptune dryer and the drum is loose how do i tighten it? Why do you say that the drum is loose? Are you able to wobble it by hand? If so, that is evidence of a bad roller that the drum

I am trying to source loose coals for Main Masquerade gas fire (GC No:32 477 78). British Gas say they are absolete and without them I cannot use the fire. Can anyone help? I have the original coal ...