...flame. Comes back on then does the same thing. If so it could be failing coils (those two black cylinders on top of the gas valve assembly). There's a kit that includes both and it's a fairly simple ...
...flame comes on for the initial start then goes out and wont come back on to finish drying clothes? Problem - Gas flame comes on first few times then quits and igniter keeps cycling on and off but ...
...These are the two black round coils. If the gas actually lights and it comes on for a few seconds then goes out, the flame sensor is probably either bad or not in the flame to 'sense' the
...on for a few minutes and stopped? (I looked at the igniter; it glowed for few seconds but no flame) I would appreciate your help. Thanks suspect coils on gas valve if ignitor glows timer is ...
Question about Maytag Dryers
...it will heat for a few seconds and sometimes it will not Go to YouTube and type in - Maytag Dryer heat coils and see if it comes up. Also type in Maytag Neptune Flame sensor on the next
...few dry clothes in and cleaned the sensor and started it up and watched the flame come on again. I put the front back on put some wet clothes in and heard the flame come on and still no continued ...
...flame comes on for a few seconds & goes away,replace your solenoids. ($3.00) If your flame doesn't come on at all, it could be the fuse(unsure of cost) Check the neg/pos lead with an OHM ...
...flame,, all therostats have continuity,dryer keeps running on auto dry, tested gas coils seem fine too any ideas? if you have tested your gas coils then i would probably check your exhaust venting. ...
2,008 questions posted
Usually answered in minutes!
867 Questions
815 Questions
489 Questions
196 Questions
146 Questions