...float floats off a switch. Then a new float that wont fall off would probably do it. If the float keeps falling off...why not tie a small piece of fishing line to it and suspend it above the switch? ...
Question about Maytag Dehumidifiers
...the tray seems like its not making contact with the switch. The float does not appear to be damaged. When you move the float up to enage the switch does it shut it off? If not you may need to adjust ...
...with the water level. The switch which the float arm presses is now pressed, which falsely signals that the reservoir is full. Hope you can figure it out from this. If you have qeustions, let me
...switch operated by a float to turn that light on and turn off the compressor, sometimes manufactures use a rubber "O" ring on the float shaft and they can slip. take the cover off the pump and check ...
float valve, the bucket must be installed "squarely'" into it's holder from top to bottom, so that the bucket makes firm contact with the actuator switch. The switch resembles a trigger switch
...float triggers a switch that shuts the unit off when it gets full. You want to make sure that float is able to move freely (not caught up on the edge of the reservoir), and that it makes a "click" ...
Question about Soleus Dehumidifiers
...float switch area that was filthy. I was unable to easily remove and fully clean the inside of the donuts. Perhaps the funk is interfering with the float switch. Next step is to research these float ...
Float Switch Need to find a float switch for a Winix dehumidifer model 851/871 Contact there customer service at: www.sylvane.com 1-800-934-9194. you will need model number etc.
...float switch is indicating a full drain pan, the light will be on and the compressor and fan will not run. Make sure the dehumidifier is installed level and the condensate drain is open allowing the ...
Question about Dehumidifiers
few minutes. i don't know. please make sure your filter is clean. unplug your unit . gently shake giggle and move the float up and down. the switch for the float may not quite be making a firm contact
232 questions posted
Usually answered in minutes!
258 Questions
100 Questions