Maytag DWU9962 Dishwasher "putting inside dish washer back" Questions

Ad

Question about Kenmore Dishwashers

1 Answer

...inside of washer is dirty. What can I do to fix the problem. Thank you Bonnie You need to take back of dish washer off unhook the drain hose and clean that hose good with soap and water or companies ...

Ad

putting dishes in the washer and obstructing the spray ams that would cause food to stay on dishes. After loading dishwasher and pushing in baskets make sure the spray arm doesnt hit any of the dishes

Ad

Question about Hobart Dishwashers

1 Answer

dish machine sticks in rinse cycle Check the solenoid valve on the rinse piping at the top back of the machine. shut water off and take the coil and the top off of the solenoid, carefully remove the ...

Question about Maytag Dishwashers

1 Answer

...inside, this works but it is happening all the time. If we don't wash our dishes before putting them in the dishwasher. We never used to have to do this. Is there a part (food grinding/clearing) that ...

Question about Viking Dishwashers

1 Answer

inside handle micro switches.... the put in new switsh put the wires back on... blacl on the right and white on the left. put your screws all back in and it will run again great. good luck!  

Question about Fisher and Paykel Dishwashers

1 Answer

...dish drawer in stainless steel. Even though they did not put anything in the bottom drawer it too comes on by it self and shows F1. I can not find our manual. Please help. Thank you so much. Kim Toth ...

Question about KitchenAid Dishwashers

1 Answer

...washer, put it on its side. Your going to see four to six silver bolts with hex heads located in the center holding in a plastic device known as the filter assembly. Remove the screws and find any ...

Question about Electrolux Dishwashers

1 Answer

washer inside of it. Place the sprayer back in-it should click into place, then screw the entire thing back on. I got so sick of having to put it back on that I stopped. This dishwasher does not clean

...DISH WASHER remove screws that are on inside of door the board is between the inside of the door and the outside of door. Unplug connectors on old board install new board reconnect and put door back ...

Not finding what you are looking for?
Dishwashers Logo

14 questions posted

Ask a Question

Usually answered in minutes!

Top Maytag Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

Paul Bade

Level 3 Expert

1818 Answers

Are you a Maytag Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...