Baby Trend Snap-N-Go LX Double Stroller "seat bottom" Questions

bottom of the seat 4. Loosen the Velcro straps on the bottom of the seat. Remove the belt buckle through the opening of the seat 5. Slide the cord of the seats out of the edges of the Quinny Buzz seat

...comes off m ine for laundering but the sunshade:) Mine must be a different model year because I don't have red buttons on the bottom. The ones under the seat are used to turn the seat

bottom of the seat. Push these up through the slot to the front of the seat on both sides. To do this, you will need to pull them toward you, and then turn the anchors to fit through the slots. 2) You

...seat on Hi Pimms. I struggled with this too. At the bottom of the stroller you'll be able to move the material that is attached to the bottom of the frame. It slides out if you are forceful enough. ...

...seat cover. Then repeat on the bottom. You will also have to unbutton the back of the seat (there are two black straps) then half fold the buggy and pull the seat towards you. Its a bit niggly and ...

...white lever that catches at the bottom of the seat attachment cracked and came loose. Hi, I think you will need to buy a replacement seat which are easy to get hold of in very good condition. Thank ...

...bottom part of the safety belt out from under the seat. This will allow that part of the lining to come loose.5Unbutton the side tabs from the backrest. The side tabs are behind the backrest near the ...

...seat cover out of the frame from bottom to top, this is a tricky 3rd; The top of the seat cover is attatched the same way but sideways, you need to undo the straps from the top then feed them through ...

...bottom of the seat. You'll see two catches - push these toward the centre and the fabric will pop up from the hard plastic shell of the sub seat, allowing you to get your fingers in between the two ...

...up? Hi, At the back of the main seat unit (which will be totally flat at this point) there is a clip at the top and at the bottom, clip these together and the seat will be upright. I hope this