Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher "float cup gets stuck" Questions

Ad

Question about Kenmore Dishwashers

1 Answer

...cup float to measure the water level in the tub. The tub has a tube extending up from the bottom that serves as a standpipe. The inverted cup has a rod that goes down through that tube and rests on a ...

Ad

Question about Dishwashers

1 Answer

float is located at the front of the dishwasher possibly on the right hand side. There is a plastic cup like device that lifts up as the water is added to a certain height then it shuts off the water.

Ad

float cup is moving up and down freely. It sometimes gets stuck in the up position and shuts off the fill switch. If it is a GE or Hotopoint check the see if the heat switch is not stuck in the center

Question about GE Dishwashers

1 Answer

...float valve. Looks like a small upside down cup. Lift it and clear anything from underneath. Not the float valve ? Check the door interlock latch. Much like a washing machine a dishwasher will only ...

Question about Maytag Dishwashers

3 Answers

...float assy. is not stuck in the up position. If that is ok, check the door latch switches for proper operation. Behind the toe panel on the bottom there will be a tech sheet that will show you how to ...

Question about Whirlpool Dishwashers

1 Answer

...float valve. Looks like a small upside down cup. Lift it and clear anything from underneath. Not the float valve either? Check the door interlock latch. Much like a washing machine a dishwasher will ...

...float is stuck at the bottom of the tube, perhaps by some food debris? If so how can we fix it? This is what I did on my Hotpoint FWD60:- I took the salt filler cap off. There was no salt in the ...

Question about Asko Dishwashers

8 Answers

...cup means? I had to slide the dishwasher forward (undercounter installation)and tip it forward as far as possible. Water leaks onto floor, but then the internal controller seems to reset and the ASKO ...

Question about Tappan Dishwashers

1 Answer

...cup without a handle it is mechanical. Lastly if you have verified the water inlet valve continuity and power along with the float / sensor yet you still get no water losen the water line and see if ...

Question about GE Dishwashers

2 Answers

...side of tub there's a float switch,if it's stuck up in the air it won't fill,i've found that when the soap cup opens it dumps the soap down near the switch and the float can get stuck up in the ...

Not finding what you are looking for?
Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher Logo

259 questions posted

Ask a Question

Usually answered in minutes!

Top Maytag Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

Paul Bade

Level 3 Expert

1818 Answers

Are you a Maytag Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...